© AB Technology Group 2007
Silco brand Firesleeve (fire sleeve) provides protection from
Heat, Flame, Molten Splash, Slag, Welding Splatter,
Grinding Sparks, Contamination, Ozone, UV and Abrasion.
Heat, Flame, Molten Splash, Slag, Welding Splatter,
Grinding Sparks, Contamination, Ozone, UV and Abrasion.
One layer of Silco Sleeve, Silco Tape or Silco Shield
provides approximately R2 of insulation value.
provides approximately R2 of insulation value.
Need to convert units (metric/imperial)?
Very High Temperature Fabrics
Manufactured of texturized fiberglass yarns, our base fabric withstands 1000°F / 520°C continuous exposure.
Then you can choose from the following finishes:
Silver Silicone Rubber Impregnation
The silicone rubber impregnation can withstand 500°F / 260°C continuous service, and similar to our other Silco products, is excellent at repelling molten metal, weldng slag, welding and grinding sparks, flame & contamination.
Can be used indoors or outdoors. Excellent material for removeable insulation covers, blankets, curtains, etc. Used often as one side of an insulated blanket with needled insulation in the centre and another layer of fabric on the other side.
Then you can choose from the following finishes:
Silver Silicone Rubber Impregnation
The silicone rubber impregnation can withstand 500°F / 260°C continuous service, and similar to our other Silco products, is excellent at repelling molten metal, weldng slag, welding and grinding sparks, flame & contamination.
Can be used indoors or outdoors. Excellent material for removeable insulation covers, blankets, curtains, etc. Used often as one side of an insulated blanket with needled insulation in the centre and another layer of fabric on the other side.
Silco Shield® Heavy Duty Fabric
PTFE Impregnation
PTFE Fluoropolymer Resin offers the advantages of a non-asbestos material with higher temperature range and with excellent reistance to almost all solvents, caustics and acids. Maximum temperature is 550F continuous.
Vermiculite Coated
The base fabric is coated with Vermiculite (100% inorganic dispersion) allowing it to withstand temperatures of 1500F with occasional use to 2000F. This is an excellent fabric for welding curtains and blankets, insulated sandwich covers and the manufacturing of gasketing. Vermiculite also adds abrasion resistance and stability to the base fabric.
Aluminized
Coated by pressure laminating Aluminum foil onto the base fabric, this is an excellent reflector of radiant heat. Aluminum melts at 1220F/660C, so for prolonged "heat soak" applications the aluminum will degrade and melt from the fabric, but to reflect radient heat for short durations this fabric is excellent. This material will withstand exposures up to 3000F/1650C for durations of a few minutes. Up to 94% of radiant energy is reflected.
PTFE Fluoropolymer Resin offers the advantages of a non-asbestos material with higher temperature range and with excellent reistance to almost all solvents, caustics and acids. Maximum temperature is 550F continuous.
Vermiculite Coated
The base fabric is coated with Vermiculite (100% inorganic dispersion) allowing it to withstand temperatures of 1500F with occasional use to 2000F. This is an excellent fabric for welding curtains and blankets, insulated sandwich covers and the manufacturing of gasketing. Vermiculite also adds abrasion resistance and stability to the base fabric.
Aluminized
Coated by pressure laminating Aluminum foil onto the base fabric, this is an excellent reflector of radiant heat. Aluminum melts at 1220F/660C, so for prolonged "heat soak" applications the aluminum will degrade and melt from the fabric, but to reflect radient heat for short durations this fabric is excellent. This material will withstand exposures up to 3000F/1650C for durations of a few minutes. Up to 94% of radiant energy is reflected.
| Part Number |
Thickness (inches) |
Thickness (mm) |
Weight oz/yd2 |
Weight g/m2 |
| TG18 | 0.032 | 18 | ||
| TG24 | 0.060 | 24 | ||
| TG30 | 0.065 | 30 | ||
| TG36 | 0.075 | 36 | ||
| TG40 | 0.090 | 40 | ||
| TG64 | 0.125 | 64 |
Base Cloth Specifications: Available in 40" and 60" widths
Silicone Impregnated Cloth: 60 " width only
| Part Number |
Thickness (inches) |
Thickness (mm) |
Weight oz/yd2 |
| TGSC15 | 0.015 | 15 | |
| TGSC17 | 0.017 | 17 | |
| TGSC32 | 0.032 | 32 |
Order Desk
& Technical Support
Tel: 1-905-448-3528
Fax: 1-905-697-9918
& Technical Support
Tel: 1-905-448-3528
Fax: 1-905-697-9918
Extreme Heat Protection
500° to 3000°F / 260° to 1650°C
Extreme environments require extreme solutions... Protection sleeves,
tapes, fabrics, ropes & gaskets for industry, aerospace, marine, and
military use from the industry leader in thermal protection solutions.
• Protects hydraulic / pneumatic hoses & lines, cables & wiring
• Reduces failures, unscheduled outages, maintenance & energy costs
• Provides protection to personnel from hot process piping & equipment
500° to 3000°F / 260° to 1650°C
Extreme environments require extreme solutions... Protection sleeves,
tapes, fabrics, ropes & gaskets for industry, aerospace, marine, and
military use from the industry leader in thermal protection solutions.
• Protects hydraulic / pneumatic hoses & lines, cables & wiring
• Reduces failures, unscheduled outages, maintenance & energy costs
• Provides protection to personnel from hot process piping & equipment
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
High Temperature
Silicone Coated
Silicone Coated
Very High Temperature
E Fiberglass Based
E Fiberglass Based
500°F / 260°C Continuous
1000°F / 520°C Continuous
Extreme Temperature
Fiberglass-Silica Based
Fiberglass-Silica Based
2300°F / 1260°C Continuous
 |
 |
 |
 |
 |
 |
 |
 |
 |
Stainless Steel Mesh
Gaskets & Sleeves
Gaskets & Sleeves
 |
 |